Chat with us, powered by LiveChat NETW202 2019 January Week 6 Quiz Latest | Credence Writers
+1(978)310-4246 [email protected]

NETW202 Introduction to Networking and Lab
WEEK 6 QUIZ
Question 1
 (TCO 4) Which of the following IPv4 addresses would never be seen on the Internet?
  15.10.10.0
  127.27.0.10
  172.28.0.88
  240.123.35.110
Question 2
 (TCO 4) Your organization is issued the IPv6 prefix of 2001:0000:130F::/48 by your service provider. With this prefix, how many bits are available for your organization to create subnetworks?
  128
  80
  16
  8
Question 3
 (TCO 4) A(n) _____ is a special, reserved IPv4 address (127.0.0.1) that can be used to test TCP/IP applications, where the packet is processed by IP at the lowest layer and sent up the stack to another application on that same computer.
  loopback
  scope
  broadcast address
  multicast address
Question 4
 (TCO 4) Which network migration technique encapsulates IPv6 packets inside IPv4 packets to carry them over IPv4 network infrastructures?
  Encapsulation
  Dual-stack
  Tunneling
  Translation
Question 5
 (TCO 4) A network administrator needs to monitor network traffic to and from servers in a data center. Which features of an IP addressing scheme should be applied to these devices?
  Random static addresses to improve security
  Addresses from different subnets for redundancy
  Predictable static IP addresses for easier identification
  Dynamic addresses to reduce the probability of duplicate addresses
Question 6
 (TCO 4) We have a subnetwork address of 195.200.40.0 with a subnet mask of 255.255.255.224. What is the broadcast address?
  195.200.40.1
  195.200.40.31
  195.200.40.127
  195.200.40.255
Question 7
 (TCO 4) Consider the following range of addresses:
2001:0DB8:BC15:00A0:0000::
2001:0DB8:BC15:00A1:0000::
2001:0DB8:BC15:00A2:0000::
2001:0DB8:BC15:00AF:0000::
The prefix-length for the range of addresses is _____.
  /74
  /72
  /70
  /68
Question 8
 (TCO 4) A user who is unable to connect to the file server contacts the help desk. The helpdesk technician asks the user to ping the IP address of the default gateway that is configured on the workstation. What is the purpose for this ping command?
  To obtain a dynamic IP address from the server
  To request the router to forward the connection request
  To resolve the domain name of the file server to its IP address
  To test if the workstation can communicate on the network
Question 9
 (TCO 4) Which three are correctly-formatted IPv6 addresses? (Select three.)
  FE80:9978:AGA0:735D
  ::DAFC:1053
  2001::96:ABF2:918
  FF00::94BD::937C
  FE80::B0A1:7942
Question 10
 (TCO 4) What is the purpose of NAT? What are its limitations?